Jinkebotong Environmental Protection Technology (Jiangsu) Co., Ltd
The importance of high concentration industrial wastewater treatment equipment
By optimizing the processing flow, enhancing equipment processing capacity, and strengthening pretreatment, high concentration industrial wastewater treatment equipment has achieved efficient removal of pollutants from wastewater in a short period of time. This not only helps to reduce the wastewater treatment cycle, but also lays a solid foundation for reducing equipment operating costs and improving treatment efficiency. The high concentration industrial wastewater treatment equipment must...
Advantages of Industrial Wastewater Treatment Equipment Manufacturers
The industrial wastewater treatment equipment produced by industrial wastewater treatment equipment manufacturers is highly efficient and energy-saving, enabling factories to treat wastewater at low cost and high efficiency during the production process. This is because we fully consider the utilization of energy in the design and development process of the equipment, which enables the equipment to save energy to the maximum extent during the treatment of sewage and ensure that the treated...
Application of Low Temperature Distiller in Wastewater Treatment
Low temperature distillation technology is a new type of wastewater treatment technology that utilizes the principle of low-temperature evaporation to separate organic, inorganic, and microbial substances from wastewater by controlling the temperature and pressure during the distillation process, achieving purification and reuse of wastewater. Low temperature distillation technology can separate and recover organic substances from organic wastewater, effectively reducing the concentration of...
Advantages of Industrial Wastewater Treatment Equipment Manufacturers
1、 Efficient and energy-saving, conducive to environmental protection The industrial wastewater treatment equipment produced by industrial wastewater treatment equipment manufacturers is highly efficient and energy-saving, enabling factories to treat wastewater at low cost and high efficiency during the production process. This is because we fully consider the utilization of energy in the design and development process of the equipment, which enables the equipment to save energy to the maximum...
Comparative analysis of high salt wastewater treatment technology
1、 Source and composition of high salt wastewater: High salt wastewater refers to wastewater containing organic matter and at least 3.5% total dissolved solids (TDS) by mass concentration. This type of wastewater has a wide range of sources. Firstly, in various industrial production processes such as chemical, pharmaceutical, petroleum, papermaking, dairy processing, and food canning, a large amount of wastewater is discharged. The water not only contains high concentrations of organic...
Substances that are not suitable for use in MVR evaporators
The MVR evaporator has certain requirements for the feed materials, mainly because the temperature rise of these materials is too high, and currently the compressor cannot meet the requirements. Therefore, for certain substances such as calcium chloride, magnesium chloride, sodium hydroxide, potassium hydroxide, calcium hydroxide, ammonium nitrate, sodium nitrate, potassium carbonate, etc., MVR evaporators may not be suitable for use. When designing the MVR evaporation process, it is necessary...
How to choose a wastewater evaporator
1、 Processing effect The evaporation crystallization treatment method for salt containing organic wastewater entering the wastewater evaporator has almost achieved a 100% retention rate for salt, and has a certain retention rate for high boiling point organic matter, which can achieve the goal of removing salt from salt containing wastewater. It is an effective method suitable for the treatment of high salt containing organic wastewater. 2、 Cost advantage The main cost of using a wastewater...
What are the stages of wastewater evaporator operation
Wastewater evaporator is based on the principle of evaporation concentration and crystallization, targeting the characteristics of high salt content and concentration in chemical organic wastewater. The evaporation efficiency and heat transfer efficiency of high salt wastewater evaporators are directly proportional, so to understand the principle of high salt wastewater evaporators, we need to start from the internal heat transfer mechanism. The operation stages of the high salt wastewater...
Significant economic benefits of wastewater evaporators
Energy saving and environmental protection: The wastewater evaporator adopts advanced heating and evaporation technology, with high thermal energy utilization rate, and can complete wastewater treatment at lower temperatures, greatly reducing energy consumption. In addition, compared to traditional chemical treatment methods, evaporators do not require the use of any chemical agents, reducing environmental pollution. Wide applicability: Wastewater evaporators are suitable for various wastewater...
Scope of application of wastewater evaporator process
The pharmaceutical wastewater heated and concentrated by the preheater is introduced into the MVR evaporator through a pump. In the heat exchanger, the pharmaceutical industry wastewater is subjected to cyclic heating, evaporation, concentration and other treatments using steam. The distilled water obtained is refluxed to the preheater for preheating the original solution; The obtained concentrated liquid and steam enter the liquid gas separator, and the separated steam enters the compressor...
Specific recommendations for selecting wastewater evaporators
According to the water quality selection of wastewater: The water quality of wastewater in different industries varies greatly. Therefore, when choosing an evaporator, the content of various suspended solids, oils, heavy metals, etc. in the wastewater should be considered. Generally speaking, for wastewater containing a high amount of suspended solids and oils, tube or plate evaporators can be chosen; For wastewater containing heavy metals, thin film evaporators or falling film evaporators can...
Main components of wastewater evaporator
1. Host The main unit of the wastewater evaporator is the core part of the entire equipment, mainly including the evaporator and the evaporator shell. The evaporator is a key component for heating and evaporating wastewater, which rapidly evaporates the wastewater in the evaporator through heating elements to achieve the effect of wastewater treatment. The evaporator shell plays a role in protecting and supporting the evaporator, and has good corrosion resistance. 2. Heating element The heating...
Low temperature evaporation wastewater treatment equipment
Advantages of low-temperature evaporation wastewater treatment equipment: 1. The clean water after wastewater treatment shall meet the A-level discharge requirements of the national GB/T31962-2015 standard. 2. The equipment runs continuously automatically, processes wastewater automatically, controls inlet and outlet water automatically, completes automatic slag discharge, and has one click start stop function. 3. Equipment maintenance is simple, just regularly clean the tank with clean water...
What factors need to be considered in wastewater treatment
1、 Wastewater quality When it comes to sewage treatment, it is recommended that we consider the quality of wastewater in daily life based on the actual situation, because the water quality of domestic sewage is usually relatively stable. The general treatment methods include acidification or oxidation biological methods, and disinfection methods can also be used for treatment. Industrial wastewater is basically treated based on the existing water quality situation to make reasonable choices in...
Safety electricity regulations for wastewater treatment equipment
Safety electricity regulations for wastewater treatment equipment. 1. Do not blindly trust switches or control devices. It is safe to only open the gate to indicate a clear breakpoint. And hang a sign that says' No closing doors, someone is working '. 2. Exposed live connectors that are disassembled or damaged should be promptly wrapped with insulating cloth and placed in a location that is not easily touched by people. 3. Do not damage or randomly pull wires. If electrical equipment such as...
Advantages and disadvantages of sewage evaporators in wastewater treatment equipment
1. The steam compressor immediately sends thermal energy to the main heat exchanger. The water in the main heat exchanger is heated and evaporated, but the sewage cannot circulate quickly in the system. With the continuous evaporation of water, the concentration of sewage increases. Coupled with sustained high temperature, chlorite precipitates to form dirt, which easily adheres to the surface of the heat exchanger. 2. Once the main heat exchanger accumulates scale, it is difficult to remove...
Congratulations to Jinkobotong Environmental Protection Technology (Jiangsu) Co., Ltd. on the official launch of its overseas website. We welcome global customers to inquire.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.