How to overcome the water removal dilemma of vacuum dryer

1. Reasons for poor water removal in vacuum dryers

If we cannot effectively remove the water from the Vacuum Dryer, it is likely that its ventilation valve is not properly connected, and everyone should know how to do it. If there is a leak in the vacuum dryer, the compressed air inside will be directly discharged. We cannot solve this problem well, but the likelihood of its occurrence is relatively low. The drain of his vacuum dryer also has a problem, as it is a contributing factor, so we should pay more attention to it and see when its specific changes are when we can use it together.

 

2. Cleaning and maintenance work of vacuum dryer

When we usually maintain and clean vacuum dryers, we not only need to clean the condenser, but also check the drainage pipes. If there is a blockage, we should immediately clear it. Of course, there are also cleaning methods available. If your blockage is minor, we can add a little detergent to the drainage pipe, shake it a few times, and then clean it. If the blockage is severe, we will disassemble the drain and clean it according to the corresponding method.