Key points and composition structure of two-dimensional mixer operation

 The Two-dimensional Mixer is mainly composed of three parts: a rotary drum, a swing frame, and a machine frame. It uses a unique pivot to slide and swing, and under the drive of the active shaft, it performs a cyclic swing and rotation composite motion, thereby achieving the mutual flow, diffusion, rolling, and mixing of various materials to achieve uniform mixing. A two-dimensional Mixer refers to a mixer in which the drum can move in two directions simultaneously, with the drum rotating and the drum swinging along with the swing frame.

Two dimensional mixers are widely used for mixing powder and granular materials. It has the characteristics of rapid mixing, large mixing volume, and convenient discharge. The mixed materials undergo left and right back and forth mixing movements with the rotation, flipping, and mixing of the drum, while also swinging with the drum. Under the combined action of these two movements, the materials are fully mixed in a short period of time. Before using the two-dimensional mixer, an air run test should be conducted. Before the test, the firmness of all connecting parts of the two-dimensional mixer, the amount of lubricating oil in the reducer, and the integrity of the electrical equipment should be checked. Then, the main switch should be closed, the power should be turned on, and the air run test should be carried out.