Where will the rake dryer be used

 The rake dryer is particularly suitable for drying heat sensitive materials, materials that are prone to oxidation at high temperatures, materials that are prone to hardening during drying, and materials that require the recovery of steam emitted during drying. After drying, the material is in powder form, so it is more suitable for finished products in powder form. After drying, it can be directly packaged without damage. Drying of materials in industries such as medicine, food, and chemical: suitable for pulp, paste, and powder materials. Thermally sensitive materials that require low-temperature drying. Easily oxidizable, explosive, strongly irritating, and highly toxic materials. Require the recycling of materials containing organic solvents. The dried material can be in the form of slurry, paste, granular, powdery or fibrous, and has been widely used in the production process of solid sodium (potassium) alcoholate.

The dried object enters from the center of the shell, and under the continuous stirring of the rake teeth rolling forward and backward, the material moves back and forth in the axial direction, constantly updating the surface in contact with the inner wall of the shell. It is directly heated by steam, uniformly stirred by the rake teeth, and destroyed by the rod, making it easier to discharge the surface moisture of the material. The vaporized moisture is discharged from the outlet of the vacuum pump through the dry Dust Collector, wet dust collector, and condenser. Suitable materials for rake dryer: materials below 100 mesh, pigments, clay like materials, soda ash detergents, alkali stone starch, dyes and pigments, clay ash, etc.